Health, Safety & Environmental - Moisture Meters

Filter Products

All Products (40) Grid view Grid view List View List View

FLIR MR265
FLIR MR265

Moisture Meter and Thermal Imager with MSX®

The FLIR MR265 is a professional pin and pinless moisture meter with thermal imaging designed to show you exactly where to investigate issues related to moisture, air leaks, and insulation voids. Featuring IGM™ (Infrared Guided Measurement) and MSX® (Multi-Spectral Dynamic Imaging enhancement) technology, the MR265 helps you quickly scan and target problem areas, visually guiding you to the spot where you can confidently take measurements, analyze readings, and ensure that problems are fixed. Using FLIR Thermal Studio™, you can then create and share professional reports that include findings and proof of repairs – giving your clients peace of mind that mold, rot, or moisture challenges have been resolved.

FLIR MR277
FLIR MR277

Building Inspection System with Moisture Hygrometer & MSX® IR Camera

The MR277 is the first FLIR building inspection system to combine the advantages of Infrared Guided Measurement (IGM) and our patented Multi-Spectral Dynamic Imaging (MSX) with advanced environmental sensors to help you quickly locate, clearly identify, and easily document problems. IGM technology and a laser pointer isolate the area where you can use the integrated pinless moisture sensor for non-invasive readings or external pin probe for invasive measurements. With automatically calculated environmental readings and a field-replaceable humidity/temperature sensor, the MR277 lets you finish the job and minimize downtime. Connect to external devices with METERLiNK® and use FLIR Tools® to enhance troubleshooting and reports.

FLIR MR176
FLIR MR176

IGM™ Moisture Meter with Replaceable Hygrometer

Featuring Infrared Guided Measurement (IGM) technology powered by a built-in FLIR Lepton® 80 x 60 thermal imaging sensor, the MR176 visually guides you to the precise spot that moisture may be hiding. Use the integrated laser and crosshair to help pinpoint the surface location of the issue found with IGM. An integrated pinless sensor and an external pin probe provide the flexibility to take either non-intrusive or intrusive measurements. A field-replaceable temperature and relative humidity sensor delivers added convenience.

FLIR MR160
FLIR MR160

IGM™ Moisture Meter

Featuring Infrared Guided Measurement (IGM), the MR160 helps you quickly target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The MR160 can serve as your go-to troubleshooting tool right out of the box — or as the perfect complement to any high resolution thermal camera you already own.

FLIR MR77
FLIR MR77

5-in-1 Moisture Meter with METERLiNK®

The FLIR MR77 has everything you need for moisture remediation or HVAC: a pinless moisture sensor and pin probe, a temperature and relative humidity sensor, and an IR thermometer. The meter includes Bluetooth® for remote viewing and sharing, as well as METERLiNK® technology to wirelessly embed readings into radiometric infrared images on compatible FLIR thermal cameras. Made with field-replaceable sensors, the MR77 is engineered to help you get more done in less time.

FLIR MR60
FLIR MR60

Moisture Meter Pro

The FLIR MR60 Moisture Meter Pro is an easy-to-use pin and pinless moisture meter with advanced functionality. An integrated pinless sensor and an external pin probe provide the flexibility to take destructive or non-destructive measurements. Select one of the eleven material groups for pin moisture, or set a reference point for pinless moisture scanning. Then conveniently save screenshots of your measurements as a CSV file with the date, time, and settings.

FLIR MR59
FLIR MR59

Ball Probe Moisture Meter with Bluetooth®

The FLIR MR59 is a pinless meter with wireless connectivity, which offers the convenience to view live readings from a mobile device via the FLIR Tools® Mobile app. Thanks to the ball-shaped sensor, users can cover a large area in a short time without making a mark; measure into corners and around baseboards easily; and detect problems below the surface.

FLIR MR55
FLIR MR55

Pin Moisture Meter with Bluetooth®

The FLIR MR55 is a pin-based meter with wireless connectivity, which offers the convenience to view readings from a mobile device via the FLIR Tools® Mobile app. Thanks to a built-in library of 11 material groups, users can tune the meter to the appropriate test material to improve measurement accuracy. This library is easy to access on the FLIR.com website by scanning a QR code on the back of the meter with a mobile device.

FLIR MR40
FLIR MR40

Moisture Pen + Flashlight

The FLIR MR40 is a pocket-portable, rugged 2-pin, single-scale moisture meter with an integrated flashlight for wood and common building materials — ideal for builders, building inspectors, remodelers, moisture remediation technicians, pest control professionals, and residential roofing and flooring contractors. Providing reliable and accurate measurements offered at a highly affordable price point, MR40 is a quick and easy-to-use tool to find and quantify moisture content.

Extech DAT12
Extech DAT12

Bluetooth Datalogging Module

The Extech DAT12 is a replacement Bluetooth Data Logging Module for the MO55W and MM750W.

Extech MO-P1
Extech MO-P1

Moisture Pin Probe

The Extech MO-P1 Moisture Pin Probe is compatible with the MO265 and MO270 moisture meters. It includes dual sharp pins and a 76.2 cm (30 in) cable with RJ45 connecter.

Extech MO200-PINS
Extech MO200-PINS

Replacement Pins for MO210/MO260/MO265 Moisture Meters

The Extech MO200-PINS are a set of Moisture Meter Replacement Pins. This product is for use with the MO210, MO260, and MO265 moisture meters and is field replaceable. It comes with fifty durable pins.

Extech MO210
Extech MO210

Pocket Moisture Meter with 2-in-1 Digital LCD Readout and Analog Bar Graph

The Extech MO210 Pocket Moisture Meter allows you to quickly assess whether wood and other porous materials have endured any water incursion. Simply push the sharply pointed electrode pins into the surface of sheetrock, drywall, wallboard, concrete, mortar, plaster or other building materials and the device will detect moisture levels between 0.2% to 2.4%. Slide the material-selection switch to wood and the handheld meter will determine moisture presence in timber from 6% to 44%. Complete with protective cap, replacement pins, and three CR-2032 button batteries.

Extech MO220
Extech MO220

Wood Moisture Meter

The Extech MO220 is specifically designed for monitoring moisture in wood. The memory contains 8 wood groups with calibrations for approximately 170 species of wood. Measurements can be taken using the integral pin electrodes or the included heavy duty remote probe. It is designed in a rugged, double molded housing construction and is pocket sized for one-handed operation. The MO220's functions include calibration check, user settable auto power off (1 to 9 minutes) with disable, and low battery indication. Complete with protective cap, temperature probe, heavy duty remote moisture probe, replacement measurement pins, two AAA batteries, and a soft case.

Extech MO220-PINS
Extech MO220-PINS

50 Replacement Pins for MO220/MO290-P

The Extech MO220-PINS is a set of 50 Replacement Pins for the MO220 Moisture Meter and MO290-P Moisture Probe. Pins have a 1 cm (0.4 in) depth.

Extech MO230
Extech MO230

Pocket Moisture Meter

The Extech MO230 Pocket Moisture Meter's large dual graphical LCD displays moisture in wood and other building materials plus air temperature and relative humidity. The analog bargraph displays moisture, minimum/maximum moisture values, and programmable wet/dry indication. Use on wood, paper, wallboard, sheet rock, cardboard, plaster, concrete, and mortar. The memory contains 3 wood groups and four building material groups with calibrations for approximately 150 species of wood and 19 building material types. The index mode has programmable high and low values to quickly locate moisture with comparative measurement. Includes replaceable threaded electrode pins, impact proof housing, auto power off which conserves battery energy, built-in battery check, and measurement verification test. Complete with protective cap, replacement pins, and three CR-2032 button batteries.

Extech MO257
Extech MO257

Pinless Moisture Meter

Take non-invasive, pinless moisture measurements on wood and building materials with Extech's MO257 Moisture Meter. Easy-to-operate with automatic calibration, this meter has a ball moisture sensor that provides smooth gliding on hard or delicate surfaces. A large backlit triple LCD displays moisture reading and Max and Min readings; user can also adjust two alarm levels to display a visual alert (flashing “RISK” or “WET” indicators) plus a beeper alert. The MO257 is a must-have tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.

Extech MO260
Extech MO260

Combination Pin/Pinless Moisture Meter

The Extech MO260 is a combination pin/pinless moisture meter that can both measure the relative moisture in wood and other building materials using pinless technology and determine percentage of moisture in sheetrock and other materials using the direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 22 mm (0.75 in) below the surface. Complete with 9V battery, replacement pins, protective cap, and pouch case.

Extech MO265
Extech MO265

Combination Pin/Pinless Moisture Meter

The Extech MO265 is a combination pin/pinless moisture meter that can both measure the relative moisture in wood and other building materials using pinless technology and determine percentage of moisture in sheetrock and other materials using the direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 22 mm (0.75 in) below the surface. In addition, a remote pin probe is included to measure moisture in difficult to access places. Complete with 9-Volt battery, replacement pins, remote pin probe, protective cap, and pouch case.

Extech MO280
Extech MO280

Pinless Moisture Meter

The Extech MO280 provides non-invasive moisture measurements in wood and other building materials with virtually no surface damage. With a measurement depth to 22 mm (0.75 in) below the surface, the MO280 uses electro-magnetic technology to quickly indicate the moisture content in building materials. Select from 10 wood types and measurement ranges. The LCD displays percentage of moisture in the wood or other material being tested. The MO280 also features an automatic internal test and calibration and low battery indication. Complete with 9V battery and pouch case.

Extech MO280-KH
Extech MO280-KH

Home Inspector Kit

Aiding in the identification of moisture, HVAC, and electrical and hot water system issues, the Extech MO280-KH Home Inspector Kit is specifically designed for home inspection professionals. It includes a pinless moisture meter for non-invasive measurement, a mini infrared thermometer that’s ideal for testing HVAC supply and return applications, a GFCI Receptacle Tester that tests GFCI circuits, and a waterproof stem thermometer that is ideal for testing hot water heaters. It is supplied in an attractive storage case that provides protection and organization for the testers whenever they are needed.

Extech MO280-KH2
Extech MO280-KH2

Professional Home Inspection Kit

The Extech MO280-KH2 Professional Home Inspection Kit aids in the identification of moisture, HVAC, and electrical and hot water system issues. The kit includes a pinless moisture meter for non-invasive moisture detection, an infrared thermometer for non-contact surface measurements (from -20°C to 400°C or from -4°F to 752°F), and a waterproof stem thermometer. The infrared thermometer has adjustable emissivity with 12:1 distance to target ratio and is ideal for testing HVAC supply and return applications. The kit is supplied in an attractive storage case that provides protection and organization for the testers whenever they are needed.

Extech MO280-KW
Extech MO280-KW

Water Damage Restoration Kit

The MO280-KW test kit is specifically designed for water damage restoration contractors who need to monitor job site conditions, progress, and insurance company reporting. The kit includes an MO280 pin less Moisture Meter, MO210 Pocket Moisture Meter, and RH490 Precision Hygro-Thermometer. Supplied in an attractive storage case that provides protection and organization for the testers whenever they are needed.

Extech MO280-RK
Extech MO280-RK

Restoration Contractor's Kit

The Extech MO280-RK Restoration Contractor's Kit is a complete solution for the restoration contractor. This kit uses pins and pinless meters to better diagnose the amount of moisture content in a certain material. The thermal hygrometer provides a fast and accurate reading of ambient room conditions and GPP calculations. This kit is a supplied in a rugged hard carrying case. The kit features the MO280 Pinless Moisture Meter which displays 0% to 99% moisture from a selection of 10 different wood types. The MO220 Wood Moisture Meter comes with integral pins and a remote pin probe that displays up to 99.9% of the moisture level with 8 different wood types with calibrations for approximately 170 wood species. The kit also includes the RH490 Precision Hygro-Thermometer which has a 2% RH accuracy and a fast 30 second RH response time. Measures humidity, temperature, dew point, wet bulb, GPP and g/kg. The Extech MO280-RK Restoration Contractor's Kit also includes the RHT10 Humidity and Temperature USB Datalogger that records up to 16,000 readings each of RH and temperature. The USB interface and software is included in the kit.

View More
Back to top
Collapse Expand
Compare products (0/3)
Compare