Engineered to the highest standards of durability, the Ariel 3MP Corner Camera features a unique corner-shape form factor and extended FOV lens that provides ceiling-to-floor and wall-to-wall coverage. Due to its corner mounting, ligature-free housing and discrete infrared illumination, the Ariel 3 MP Corner camera is an ideal solution for any deployment that requires full coverage from a single camera — including correctional institutions, healthcare facilities, building lobbies and elevators.
The FLIR Ariel 3MP Corner Camera’s has a rugged, no-ligature housing that resists tampering, yet its sleek design makes it suitable for both industrial and commercial locations.
The Ariel 3MP Corner Camera’s specialty lens provides ceiling-to-floor and wall-to-wall coverage with no blind spots.
The camera delivers exceptional low-light performance due to extreme color sensitivity and IR-illumination that is imperceptible to the human eye.
Vandal-resistant housing is rated IK10+ (50 Joule impact) and IP66 (outdoors)
WDR creates images with greater details in complex and challenging lighting conditions
The Ariel 3MP Corner Camera includes audio support for synchronized video-audio streaming and recording
High-sensitivity 0.02 Lux performance in color mode and built-in discreet IR illumination produce quality imagery in low light and no-light environments.
The Ariel 3MP can conceal areas within the camera’s field of view to address privacy requirements.
The camera sends automatic alerts when it detects attempts at tampering and sabotage.
|Model Number||FLIR Ariel 3MP Corner Camera|
|Image Sensor||1/2.8” BSI CMOS|
|Sensor Resolution||2048 x 1536|
|Sensitivity||0.02 (color)/0.01 (BW), 0 Lux with IR illuminator ON, measured at 30 IRE|
|Lens Type||2.1mm, 120° HFOV x 90° VFOV, F1.8, D/N|
|AES||1/1.75 to 1/10,000 (auto)|
|DSS||Max. shutter 1/7.5(6.25)~1/60(50) / min.|
|White Balance||Auto / ATW / Manual / One Push|
|BLC||On / Off|
|WDR||1/1.75 to 1/10,000 (auto)|
|Video Motion Detection||Yes|
|Mechanical IR Cut Filter||Yes|
|Signal to Noise Ratio||±50 dB|
|ONVIF Compliance||Onvif Profile S & G|
|Audio Intensity Detection||Yes|
|Compression||Fully compliant multi-stream H.264 main/high profile + MJPEG|
|Max Performance||H.264 30/25 fps@QXGA + SVGA(NTSC/PAL) or H.264 15/12 fps@QXGA +1280x960 + SVGA (NTSC/PAL)|
|Resolution Range||Scalable from SVGA to 3MP|
|Bandwidth||Configurable between 64Kbps and 20Mbps|
|SD Card Recording||microSDXC up to 64GB (Class 10)|
|Distance||up to 10 m (33 ft.)|
|Angle of illumination||Full 60°|
|LED Type||High efficiency SMD|
|Peak Emission Wavelength (nm)||940|
|Network Protocols||TCP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv4, IPv6, SSL, LDAP|
|Ethernet||10/100, auto sensing, half / full duplex (RJ45)|
|Remote Configuration||Via web browser or supported video management software|
|Firmware Upgrade||Flash memory for upgrade of camera firmware over the network|
|Supported Web Browser||Internet Explorer 10+, Firefox 50+, Chrome 55+|
|Security||User account with password protection and IP filter|
|Input||Built in Microphone, G.711 a/μ-law, AAC support|
|Input||1 Dry Alarm Contact|
|Output||1 Relay Contact|
|Enclosure||IK10+ 50 Joule Impact Resistant / IP66|
|Dimensions||184 x 179 x 59 mm|
|Unit Weight||1.21kg (2.67 lbs.)|
|Lens / IR Window||IK10 Vandal Resistant Polycorbonate|
|Lens Window Transmittance||45%|
|Input Voltage||802.3af PoE|
|Power Consumption||3.4W / 9.4W with heater and IR|
|Operating Temperature||-40°C to 50°C (-40°F to 122°F)|
|Storage Temperature||-40°C to 60°C (-40°F to 140°F)|
|Warranty & Regulatory|
|Warranty||According to FLIR RMA Policy and Process Notice document|
|USA||UL 60950, FCC Part 15 (subpart B, class A)|
|International||CE marked, EN61000-6-3 & EN50130-4, RoHS, RCM|